Online Catalog Links Page
|
|
 |
SmartFan Application
and Design Information |
 |
 |
|
|
|
| |
|
SmartFan AC Speed Controls |
|
|
|
Current
Rating |
Input
Voltage
Range |
Special
Features |
Model |
Single or Three-Phase 4.0 Amps
|
103.5
- 253 VAC |
Economical Variable Frequency Drive for inverter grade fractional HP single phase or three-phase motors with multiple control input options including analog signal (4-20mA, 0-5VDC, 0-10VDC), temperature (thermistor), contact closures, potentiometer, and Modbus communications. |
Stratus II |
| 18 Amps |
85
- 300 VAC |
General purpose TRIAC controller for approved voltage controlled PSC and shaded pole motors up to 2 HP. Control inputs include 0-10 VDC, 4-20 mA, up to 3 temperature sensors, on board pressure sensor or remote transducer. |
Nimbus-HP |
| Up
to
7.5 Amps |
95
- 250 VAC |
General purpose TRIAC controller for approved fractional HP voltage controlled PSC and shaded pole motors. Available as DIN rail mount, 4x4 job box mount or NEMA 4X enclosure. Control inputs include 0-10 VDC, 4-20 mA, up to 3 temperature sensors, on board pressure sensor or remote transducer. |
Nimbus |
| 8.0
Amps |
95
- 265 VAC |
General purpose TRIAC controller for approved fractional HP voltage controlled PSC and shaded pole motors. Available with NEMA 4X enclosure. Control inputs include 0-5 VDC, 0-10 VDC, 4-20 mA or temperature sensor. Includes on board EMI filter. |
AC-VX |
|
|
SmartFan DC Speed Controls |
|
|
|
Current
or
Power Rating |
Input
Voltage
Range |
Special
Features |
Model |
| 20
Watts |
11.5
- 30 VDC |
Control
and sensor in convenient probe package. Linear type regulator. |
Wisp
II |
| 3.0
Amps |
36
- 75 VDC |
Controls and monitors up to 4 fans. Diode ORing of dual power feeds. Hot-swap active inrush with UVLO/OVLO. Controls fan speed based on single/dual I2C communication or temperature. Current mode buck control circuit provides high power efficiency. OR'd MOS Relay and LED alarms indicate fan failure, over temperature, sensor failure, loss of power and micro-controller failure. Managed or intelligent FRU ATCA compliance available. |
Fusion-4
|
| 5.0
Amps |
10
- 14 VDC |
I2C fan speed control and alarm for 12 VDC fans. Includes on-board thermistor and EEPROM storage. |
Vortex
|
| 5.0
Amps |
10
- 58 VDC |
Switching type regulator with Control Temperature selectable by jumper. Includes
temperature alarm. |
Omni
SD |
| 5.0
Amps |
10
- 75 VDC |
Diode
ORing of dual power feeds. 12, 24 or 48 VDC operation jumper selectable. Controls fan speed based on temperature at up to three OR’d sensors. Includes temperature alarm. Switching type regulator includes voltage limiter. |
Multi SD |
| 5.0
Amps |
36 - 75 VDC |
Designed
for Telecom Applications. Controls and monitors up to six fans. Diode ORing of dual power feeds. Controls fan speed based on temperature at
up to three OR’d sensors or I2C interface. Buck/Boost switching type regulator. Alarms indicate fan failure, over temperature, sensor failure, loss of power and micro-controller failure. |
Multi SR |
| 6.0
Amps |
10 - 72 VDC |
Designed
for DC motor speed control applications in HVAC, electronic and industrial control applications. Accepts a DC (10-72V) or AC (12-48V) power source and can control 12, 24 or 48 VDC motors from a variety of control signals (0-5 VDC, 0-10 VDC, 4-20 mA or potentiometer. Buck control circuit operates at high frequency to achieve maximum power efficiency at minimum size. |
Aurora |
| 9.0
Amps |
36
- 75 VDC |
Controls and monitors up to 9 fans. Diode ORing of dual power feeds. Hot-swap active inrush with UVLO/OVLO. Controls fan speed based on single/dual I2C communication or temperature. Current mode buck control circuit provides high power efficiency. OR'd MOS Relay and LED alarms indicate fan failure, over temperature, sensor failure, loss of power and micro-controller failure. Managed or intelligent FRU ATCA compliance available. |
Fusion-9
|
|
|
SmartFan 4 Wire (PWM) DC Speed Controls |
|
|
|
Current
or
Power Rating |
Input
Voltage
Range |
Special
Features |
Model |
| Up to 6.0
Amps |
10 - 60 VDC |
Fan speed control for up to six 4 wire speed controllable (PWM) fans. Regulates fan speed from an I2C interface (single or dual), temperature sensor (on-board or remote), analog control signal (PWM, 5.0 VDC).
|
Cirrus-6 |
| Up to 10.0
Amps |
10 - 60 VDC |
Fan speed control with programmable interface for one or two 4-wire speed controllable (PWM) fans. Regulates fan speed from a control signal (0-10VDC, 0-20mA), remote transducer or thermistor. Programmable settings configured using a menu-driven handheld programmer Navigator for idle speed, full speed, fan off and alarm trip points. |
Cirrus-2 |
|
|
SmartFan ECM Motor Speed Controls |
|
|
|
Current
or
Power Rating |
Input
Voltage
Range |
Special
Features |
Model |
Any
(not applicable) |
24 VAC |
ECM Motor Control with programmable interface for one or two ECM motors. Regulates ECM motor speed from a control signal (0-10VDC, 0-20mA), remote transducer or thermistor. Programmable settings configured using a menu-driven handheld programmer Navigator for idle speed, full speed, fan off and alarm trip points.
|
Cirrus-ECM |
|
|
SmartFan Fan Failure Alarms |
|
|
|
|
Alarm
Type |
Quantity
of Fans
Monitored |
Input
Voltage
Range |
Output
Connection
Options |
Individual
Outputs |
OR'd
Outputs |
Isolated
Outputs |
Model |
| LED |
Logic |
Audible |
Fan
Speed |
Up
to 9 |
6
- 75 VDC |
Y
|
Y
|
N
|
Y
|
Y
|
Y
|
TachScan-9 |
| Up
to 3 |
6
- 60 VDC |
Y
|
Y
|
N
|
N
|
Y
|
Y
|
TachScan-3
|
|
Up
to 6 |
5
- 25 VDC |
Y
|
Y
|
Y
|
Y
|
Y
|
N
|
TachStrip
|
|
|
| Product Description |
Model |
| LabStrobe STB100-F is a hand held LED stroboscope used to measure the speed of rotation or frequency of vibration of a fan, motor, other mechanical part or system. The lastest in LUXEON LED technolgy provides this pocket sized strobe with unparalleled brightness and battery life. |
LabStrobe
STB100-F |
| LabPower DS1502 is a dual adjustable benchtop power supply designed for powering small digital and analog circuits. Both 15 volt power supplies are independent allowing +/- configurations as well as dual supply logic circuits. |
LabPower
DS1502 |
|
|
| Product Description |
Model |
| Navigator PRG00-F is a hand held, menu driven programmer used to configure compatible SmartFan products. Memory functions allow easy copying of product profiles from one product to another as well as storage of product profiles for future use. |
Navigator
PRG00-F |
|
 |
